VAC-U-MAX 3500 Series - Standard & Sanitary

Vacuum Filler System Features & Benefits 

• Single-Jet and Twin-Jet Power Units
• Unifilter & Multifilter Designs with Static-Conductive Filters
• Two Discharge Designs in 12" (304.8 mm) and 16" (406.4) Diameters: Offset and Tube Hopper
• Discharge Valves: 1500 Series - Counterweighted 6" (152.4mm) or Powered 8" (203.2mm) for the 3500 Series  
• Materials of Construction / Finish: 304SS (Bead blast), 316L (Polished)  
• Controls: UL-approved, NEMA 4X with Multifunction controller (MFNC)

VAC-U-MAX 3500 Series - Standard & Sanitary

	3500 Series					3500 Series SANITARY
Convey Rate: lbs/hr (kg/hr)	3,500 (1,600)					3,500 (1,600)
Receiver Diameter: inch (mm)	16 (400)					16 (400)
Discharge Opening: inch (mm)	8 (200)					8 (200)
Receiver Style	Offset Cone					Offset Cone
Vacuum Producer	1-Jet or 2-Jet Venturi*	Regen Blower*	Vacuum Pump			1-Jet or 2-Jet Venturi*	Regen Blower	Vacuum Pump
Max. Vacuum: In Hg (mm Hg)	8-16 (200-400)	5 (125)	12 (300)			8-16 (200-400)	5 (125)	12 (300)
Filter Media (S/C PTFE): Unifilter (U) or Cartridge (C)	U,C	C	C		U, C		C	C
Materials of Construction: Carbon Steel (CS), 316L Stainless Steel (SS)**	CS, SS					SS
Interior Finish: Carbon Steel (CS), Bead Blast (BB), 180-Grit Polish (P)	BB, P					180 Grit Polish (Ra30)
Exterior Finish: Carbon Steel (CS), Bead Blast (BB), 180-Grit Polish (P)	BB, P					180 Grit Polish (Ra30)
Conveyor Mounting Choices: Two Ears (E), Suspension Frame (SF), or Bottom Flange (BF)	SF					SF (Sanitary)
Inlet Size (OD): inch (mm)	1.5 (38) or 2.0 (50mm)					1.5 (38) or 2.0 (50mm)
Utility Requirements: Compressed Air (CA, Line Size), or Electric (E, 1ph or 3ph)	CA 1/2" or 3/4"	E, 3ph	CA 1/2" or 3/4"			CA 1/2" or 3/4"	E, 3ph	E, 3ph

*Venturi power units are mounted on the suspension frame of the receiver body 

** Materials of construction refers to the vacuum conveyor product contact parts, not vacuum producers